2.1 Introduction
In Class IX, you have studied polynomials in one variable and their degrees. Recall that if is a polynomial in , the highest power of in is called the degree of the polynomial . For example, is a polynomial in the variable of degree is a polynomial in the variable of degree
is a polynomial in the variable of degree 3 and is a polynomial in the variable of degree 6 . Expressions like etc., are not polynomials.
A polynomial of degree 1 is called a linear polynomial. For example, , , etc., are all linear polynomials. Polynomials such as , etc., are not linear polynomials.
A polynomial of degree 2 is called a quadratic polynomial. The name ‘quadratic’ has been derived from the word ‘quadrate’, which means ‘square’. , are some examples of quadratic polynomials (whose coefficients are real numbers). More generally, any quadratic polynomial in is of the form , where are real numbers and . A polynomial of degree 3 is called a cubic polynomial. Some examples of
a cubic polynomial are . In fact, the most general form of a cubic polynomial is
where, are real numbers and .
Now consider the polynomial . Then, putting in the polynomial, we get . The value ’ -6 ‘, obtained by replacing by 2 in , is the value of at . Similarly, is the value of at , which is -4 .
If is a polynomial in , and if is any real number, then the value obtained by replacing by in , is called the value of at , and is denoted by .
What is the value of at ? We have :
Also, note that .
As and and 4 are called the zeroes of the quadratic polynomial . More generally, a real number is said to be a zero of a polynomial , if .
You have already studied in Class IX, how to find the zeroes of a linear polynomial. For example, if is a zero of , then gives us , i.e., .
In general, if is a zero of , then , i.e., . So, the zero of the linear polynomial is .
Thus, the zero of a linear polynomial is related to its coefficients. Does this happen in the case of other polynomials too? For example, are the zeroes of a quadratic polynomial also related to its coefficients?
In this chapter, we will try to answer these questions. We will also study the division algorithm for polynomials.
2.2 Geometrical Meaning of the Zeroes of a Polynomial
You know that a real number is a zero of the polynomial if . But why are the zeroes of a polynomial so important? To answer this, first we will see the geometrical representations of linear and quadratic polynomials and the geometrical meaning of their zeroes.
Consider first a linear polynomial . You have studied in Class IX that the graph of is a straight line. For example, the graph of is a straight line passing through the points and .
From Fig. 2.1, you can see that the graph of intersects the -axis mid-way between and , that is, at the point . You also know that the zero of is . Thus, the zero of the polynomial is the -coordinate of the point where the graph of intersects the -axis.
Fig. 2.1
In general, for a linear polynomial , the graph of is a straight line which intersects the -axis at exactly one point, namely, . Therefore, the linear polynomial , has exactly one zero, namely, the -coordinate of the point where the graph of intersects the -axis.
Now, let us look for the geometrical meaning of a zero of a quadratic polynomial. Consider the quadratic polynomial . Let us see what the graph[^0]of looks like. Let us list a few values of corresponding to a few values for as given in Table 2.1.
Table 2.1
|
-2 |
-1 |
0 |
1 |
2 |
3 |
4 |
5 |
|
6 |
0 |
-4 |
-6 |
-6 |
-4 |
0 |
6 |
If we locate the points listed above on a graph paper and draw the graph, it will actually look like the one given in Fig. 2.2.
In fact, for any quadratic polynomial , the graph of the corresponding equation has one of the two shapes either open upwards like or open downwards like depending on whether or . (These curves are called parabolas.)
You can see from Table 2.1 that -1 and 4 are zeroes of the quadratic polynomial. Also note from Fig. 2.2 that -1 and 4 are the -coordinates of the points where the graph of intersects the -axis. Thus, the zeroes of the quadratic polynomial are -coordinates of the points where the graph of intersects the -axis.
Fig. 2.2
This fact is true for any quadratic polynomial, i.e., the zeroes of a quadratic polynomial , are precisely the -coordinates of the points where the parabola representing intersects the -axis.
From our observation earlier about the shape of the graph of , the following three cases can happen:
Case (i) : Here, the graph cuts -axis at two distinct points A and .
The -coordinates of and are the two zeroes of the quadratic polynomial in this case (see Fig. 2.3).
Fig. 2.3
Case (ii) : Here, the graph cuts the -axis at exactly one point, i.e., at two coincident points. So, the two points A and of Case (i) coincide here to become one point A (see Fig. 2.4).
Fig. 2.4
The -coordinate of A is the only zero for the quadratic polynomial in this case.
Case (iii) : Here, the graph is either completely above the -axis or completely below the -axis. So, it does not cut the -axis at any point (see Fig. 2.5).
Fig. 2.5
So, the quadratic polynomial has no zero in this case.
So, you can see geometrically that a quadratic polynomial can have either two distinct zeroes or two equal zeroes (i.e., one zero), or no zero. This also means that a polynomial of degree 2 has at most two zeroes.
Now, what do you expect the geometrical meaning of the zeroes of a cubic polynomial to be? Let us find out. Consider the cubic polynomial . To see what the graph of looks like, let us list a few values of corresponding to a few values for as shown in Table 2.2.
Table 2.2
Locating the points of the table on a graph paper and drawing the graph, we see that the graph of actually looks like the one given in Fig. 2.6.
We see from the table above that and 2 are zeroes of the cubic polynomial . Observe that and 2 are, in fact, the -coordinates of the only points where the graph of intersects the -axis. Since the curve meets the -axis in only these 3 points, their -coordinates are the only zeroes of the polynomial.
Let us take a few more examples. Consider the cubic polynomials and . We draw the graphs of and in Fig. 2.7 and Fig. 2.8 respectively.
Fig. 2.6
Fig. 2.7
https://temp-public-img-folder.s3.amazonaws.com/sathee.prutor.images/images/ncert-book-english/class-10-img/2024-12-10 14_32_05-NCERT.png

Fig. 2.8
Note that 0 is the only zero of the polynomial . Also, from Fig. 2.7, you can see that 0 is the -coordinate of the only point where the graph of intersects the -axis. Similarly, since and 1 are the only zeroes of the polynomial . Also, from Fig. 2.8, these values are the -coordinates of the only points where the graph of intersects the -axis.
From the examples above, we see that there are at most 3 zeroes for any cubic polynomial. In other words, any polynomial of degree 3 can have at most three zeroes.
Remark : In general, given a polynomial of degree , the graph of intersects the -axis at atmost points. Therefore, a polynomial of degree has at most zeroes.
Example 1 : Look at the graphs in Fig. 2.9 given below. Each is the graph of , where is a polynomial. For each of the graphs, find the number of zeroes of .
Fig. 2.9
Solution :
(i) The number of zeroes is 1 as the graph intersects the -axis at one point only.
(ii) The number of zeroes is 2 as the graph intersects the -axis at two points.
(iii) The number of zeroes is 3. (Why?)
(iv) The number of zeroes is 1 . (Why?)
(v) The number of zeroes is 1 . (Why?)
(vi) The number of zeroes is 4 . (Why?)
2.3 Relationship between Zeroes and Coefficients of a Polynomial
You have already seen that zero of a linear polynomial is . We will now try to answer the question raised in Section 2.1 regarding the relationship between zeroes and coefficients of a quadratic polynomial. For this, let us take a quadratic polynomial, say . In Class IX, you have learnt how to factorise quadratic polynomials by splitting the middle term. So, here we need to split the middle term ’ as a sum of two terms, whose product is . So, we write
So, the value of is zero when or , i.e., when or . So, the zeroes of are 1 and 3 . Observe that :
Let us take one more quadratic polynomial, say, . By the method of splitting the middle term,
Hence, the value of is zero when either or , i.e., when or . So, the zeroes of are and -2 . Observe that :
In general, if [^1] and [^1] are the zeroes of the quadratic polynomial , , then you know that and are the factors of . Therefore,
\missing
Comparing the coefficients of and constant terms on both the sides, we get
Let us consider some examples.
Example 2 : Find the zeroes of the quadratic polynomial , and verify the relationship between the zeroes and the coefficients.
Solution : We have
So, the value of is zero when or , i.e., when or . Therefore, the zeroes of are -2 and -5 . Now,
Example 3 : Find the zeroes of the polynomial and verify the relationship between the zeroes and the coefficients.
Solution : Recall the identity . Using it, we can write:
So, the value of is zero when or .
Therefore, the zeroes of are and .
Now,
Example 4 : Find a quadratic polynomial, the sum and product of whose zeroes are -3 and 2 , respectively.
Solution : Let the quadratic polynomial be , and its zeroes be and . We have
If , then and .
So, one quadratic polynomial which fits the given conditions is .
You can check that any other quadratic polynomial that fits these conditions will be of the form , where is real.
Let us now look at cubic polynomials. Do you think a similar relation holds between the zeroes of a cubic polynomial and its coefficients?
Let us consider .
You can check that for . Since can have atmost three zeroes, these are the zeores of . Now,
However, there is one more relationship here. Consider the sum of the products of the zeroes taken two at a time. We have
In general, it can be proved that if are the zeroes of the cubic polynomial , then
Let us consider an example.
Example 5 : Verify that are the zeroes of the cubic polynomial , and then verify the relationship between the zeroes and the coefficients.
Solution : Comparing the given polynomial with , we get
Therefore, and are the zeroes of .
So, we take and .
Now,
2.4 Summary
In this chapter, you have studied the following points:
1. Polynomials of degrees 1,2 and 3 are called linear, quadratic and cubic polynomials respectively.
2. A quadratic polynomial in with real coefficients is of the form , where are real numbers with .
3. The zeroes of a polynomial are precisely the -coordinates of the points, where the graph of intersects the -axis.
4. A quadratic polynomial can have at most 2 zeroes and a cubic polynomial can have at most 3 zeroes.
5. If and are the zeroes of the quadratic polynomial , then
6. If are the zeroes of the cubic polynomial , then